-01-01.png)
When the All Sport MX-1 is powered on, it will run through a power on self-test (POST) to test its hardware functionality. If an error is found, the error will be reported via the status LED.
Normal Operation
LED will flash with an On/Off heartbeat when running and not connected to a Bluetooth® device.
LED will be steady ON when connected to a Bluetooth® device.
Error Condition Status reported
The LED will indicate any error condition by turning on steady for 3 seconds and then follow that with a specific number of "LED flash to ON" for the # of the error state being reported. The MX-1 will continue to go through this pattern until it is reset or power cycled. It will flash the # of the most severe error condition if more than 1 is present. A list of the possible error conditions is shown here in order of severity:
