Toth's Sports
Sign Up for Announcements
Toth's Sports
 

 

Troubleshooting

Problem #2 : Scoreboard not lighting but console is working

 

Possible Cause #1: No wired signal from console

Solutions/Items to Check:

1)  Check that the scoreboard is receiving the correct 120 (or 240) VAC power.  (See specific product specifications)

2)  Check that the red DS2 LED on the driver lights up when sending commands from the control console.

 

 

Possible Cause #2: No radio signal from console

Solutions/Items to Check:  

1) Cycle power to the scoreboard and watch for radio receiver broadcast/ channel settings (see Section 2.8)

2)  Check that the green POWER and amber RADIO IN RANGE indicators on the radio receiver in the scoreboard light up when the control console is powered on (see Section 2.8). Keep the console between 20 to 1500 feet from the scoreboard.

3)  Move the console 20-30 feet from the scoreboard and test again. Verify that both the console and scoreboard antennae are securely tightened and in a vertical position.

4)  Replace the radio receiver.

 

Possible Cause #3: No signal to the driver

Solutions/Items to Check:

1) Check that the scoreboard is receiving the correct 120 (or 240) VAC power.  (See specific product specifications)

2) Check that the red DS2 LED on the driver lights up when sending commands from the control console (see above).

3) Swap the driver with one known to work correctly and with the same part number to verify the problem. Replace if necessary.

 

Possible Cause #4: No power to the driver

Solutions/Items to Check:

1) Check that the green DS1 LED on the driver is always lit up when the scoreboard is powered on (see Section 2.6)

 

 
Toth's Sports, Inc. - All Rights Reserved


Developed by Orlando Web Services